Post-Production

2. Blink +
2.7. Assembly +
2.7.1. Build a Mock Board
2.7.2. Loading Parts
2.7.3. Bake the Board
➪ 2.7.4. Post-Production
2.7.5. Final Verification
2.7.6. Post Mortem

2014-07-21 19:58:26 chip Page 1074 📢 PUBLIC

A quick check under the microscope, everything looks OK!

Add Through-Hole Parts

I need to add the JTAG14 header and a jumper to select JTAG power. I could not find any unshrouded breakaway headers or jumpers, so I fabricated a jumper from a piece of wire soldered in place.